When using the Decra Barge cover fix the barge boards in a position where they are 25mm higher than the tops of the tile battens.
Underlay should turn up against the edge of bargeboard by 25mm.
Installing the Decra barge cover at gables
Start off at the eave by nailing a Decra Barge Cover Eave Closure into position.
Fold lower half of front edge of barge cover back up and behind front lip of eaves tile.
Nail remaining bargecovers into position using 3 nails vertically and 3 horizontally as before. Care should be taken to ensure bargecovers are correctly lapped.
After completion of roof cover the bargecover nail heads with Decra finishing kit.
Slightly quicker to install and more cost effective than the cloaked verge cap.
For use at gables, verges and barges.
Cover – 1110mm.