Metrotile eQube Solar Roof Tile – Integrated Solar Roofing System

The Metrotile eQube Solar Roof Tile is a fully integrated photovoltaic roofing solution designed to sit seamlessly within the Metrotile Qube lightweight metal roofing system.

Rather than mounting conventional solar panels above the finished roof covering, eQube incorporates photovoltaic technology directly into a tile designed to coordinate with the surrounding Metrotile Qube roof. This creates a sleek, low-profile solar roof with minimal additional height and weight.

Each eQube Solar Tile has a stated maximum power output of 60W, weighs approximately 3.1kg and covers 1260mm x 320mm. The system is suitable for appropriate roofs from a minimum pitch of 15°.

Integrated Solar Tiles for Metrotile Qube Roofs

Metrotile eQube has been specifically developed as part of the Metrotile Qube roofing system.

The solar tiles integrate into the roof alongside the surrounding Qube tiles, creating a more unified appearance than conventional solar panels installed on brackets above the roof covering.

This makes eQube particularly attractive for projects where both solar electricity generation and roof aesthetics are important.

60W Maximum Power per Solar Tile

Each Metrotile eQube Solar Roof Tile provides a stated maximum power output of:

60W

The number of solar tiles required will depend on the desired system capacity, available roof area, roof orientation, shading and complete electrical design.

Approximate System Output

Based on the stated 60W maximum output per tile:

• 5 tiles: 300W
• 10 tiles: 600W / 0.6kW
• 15 tiles: 900W / 0.9kW
• 20 tiles: 1,200W / 1.2kW
• 25 tiles: 1,500W / 1.5kW
• 30 tiles: 1,800W / 1.8kW
• 40 tiles: 2,400W / 2.4kW
• 50 tiles: 3,000W / 3.0kW

These figures represent the combined stated maximum power ratings of the tiles and should not be interpreted as guaranteed real-world energy generation. Actual output depends on installation and environmental conditions.

3 x 7 Multicrystalline Photovoltaic Cells

Each eQube Solar Tile incorporates:

3 x 7 multicrystalline photovoltaic cells

with nano-wire technology.

The photovoltaic technology is incorporated into the low-profile tile design, allowing electricity generation to be integrated into the roof covering rather than relying on a conventional above-roof solar panel array.

Plug and Play MC4 Connections

A 40mm double-insulated, UV-resistant MC4 connector cable is attached to the rear of each eQube tile.

This provides a convenient plug-and-play connection arrangement as part of the complete photovoltaic installation.

The electrical design, connection, testing and commissioning of the solar installation should be completed by appropriately competent installers in accordance with the applicable requirements.

Sleek, Low-Profile Solar Roof

One of the principal advantages of eQube is its appearance.

Because the photovoltaic tiles are designed to integrate with the Metrotile Qube roofing system, the solar installation does not require the same visually prominent above-roof arrangement associated with conventional framed solar panels.

This creates:

• Minimal additional roof height
• A more integrated roof appearance
• Reduced visual interruption across the roof plane
• Coordination with Metrotile Qube roofing
• A contemporary solar roof finish

Lightweight Solar Roofing

Each Metrotile eQube Solar Tile weighs approximately:

3.1kg

The lightweight design complements the wider Metrotile lightweight roofing concept and helps minimise the additional weight introduced by the photovoltaic installation.

The complete roof structure must still be assessed as suitable for the proposed roofing and solar system.

Suitable from a 15° Roof Pitch

The stated minimum roof pitch for Metrotile eQube is:

15°

The complete roof should be designed and installed according to the current Metrotile eQube and Qube technical requirements.

Large Integrated Solar Tile

Each eQube tile has a stated cover size of:

1260mm x 320mm

with a stated height of:

1.5mm

The broad format allows each solar tile to integrate across a substantial section of the Qube roof covering while maintaining the system’s low-profile appearance.

Charcoal Matte Finish

The base tile is supplied in:

Charcoal

with a:

Matte finish

This provides a dark, understated background for the photovoltaic surface and coordinates with the surrounding Metrotile Qube roofing system.

Metrotile eQube Fixings

The specified fixings are:

35mm Metrotile Self Drilling Screws

The current Metrotile installation requirements should be followed for fixing positions, quantities and installation details.

10-Year Product Warranty

The eQube Solar Tile is supplied with a stated:

10-year product warranty

25-Year Installation and Performance Warranty

The system is also supplied with a stated:

25-year installation and performance warranty

The applicable Metrotile warranty terms, system design requirements and installation conditions should be checked for the particular project.

Suitable for Homes and Commercial Buildings

The integrated design makes eQube suitable for appropriate projects where a Metrotile Qube roof and photovoltaic electricity generation are required.

Potential applications include:

• New build homes
• Self-build projects
• Home extensions
• Residential developments
• Commercial buildings
• Offices
• Renovation projects
• Appropriate lightweight roofing projects
• Projects where integrated solar aesthetics are a priority

Suitability and system sizing should be confirmed for the individual project.

Key Benefits

• Integrated Solar Roofing: Photovoltaic technology designed specifically for the Metrotile Qube roofing system.
• 60W Maximum Power: Each tile has a stated maximum output of 60W.
• Low-Profile Appearance: Integrates into the roof rather than sitting prominently above it.
• Lightweight: Approximately 3.1kg per solar tile.
• Minimum 15° Pitch: Suitable for appropriate pitched roofing applications from 15°.
• Large Cover Size: 1260mm x 320mm stated cover dimensions.
• Multicrystalline Technology: 3 x 7 photovoltaic cell configuration.
• Nano-Wire Technology: Incorporated into the photovoltaic system.
• MC4 Connection: Double-insulated UV-resistant connector cable attached to each tile.
• Plug and Play Design: Designed to simplify connection during installation.
• Charcoal Finish: Matte Charcoal base tile coordinates with the Qube roof.
• Dedicated Metrotile Fixings: Uses compatible 35mm Metrotile Self Drilling Screws.
• 10-Year Product Warranty: Manufacturer product warranty.
• 25-Year Warranty: Stated installation and performance warranty.
• Residential or Commercial: Suitable for appropriate domestic and business projects.

Technical Specification

• Brand: Metrotile
• Product: eQube Solar Roof Tile
• System: Metrotile Qube
• Product Type: Integrated Photovoltaic Solar Roof Tile
• Photovoltaic Configuration: 3 x 7 Multicrystalline Cells
• Technology: Nano-Wire
• Maximum Power: 60W per Tile
• Cover Length: 1260mm
• Cover Width: 320mm
• Stated Height: 1.5mm
• Tile Weight: Approximately 3.1kg
• Minimum Roof Pitch: 15°
• Connector: MC4
• Cable: 40mm Double-Insulated UV-Resistant MC4 Connector Cable
• Base Tile Colour: Charcoal
• Finish: Matte
• Fixings: 35mm Metrotile Self Drilling Screws
• Product Warranty: 10 Years
• Installation and Performance Warranty: 25 Years

What Is the Metrotile eQube Solar Tile?

The Metrotile eQube is an integrated photovoltaic roof tile designed specifically for use within a Metrotile Qube roofing system.

Instead of installing conventional framed solar panels above the roof, eQube allows the photovoltaic elements to form an integrated part of the roof design.

How Much Power Does Each eQube Tile Produce?

Each eQube Solar Tile has a stated maximum power rating of:

60W

For example, 20 tiles would provide a combined rated maximum power of:

20 x 60W = 1,200W or 1.2kW

Actual electricity generation will vary according to factors including orientation, roof angle, shading, location, weather and complete system design.

How Many eQube Solar Tiles Do I Need for 1kW?

Based purely on the stated 60W maximum rating:

1,000W ÷ 60W = 16.67 tiles

Therefore, at least 17 tiles would provide a combined nominal maximum rating of approximately:

1.02kW

The actual system should be designed according to the required output and site conditions rather than this calculation alone.

How Many eQube Tiles Would Make a 3kW System?

Based on the stated maximum rating:

3,000W ÷ 60W = 50 tiles

Therefore, 50 eQube tiles would have a combined stated maximum rating of approximately 3kW.

What Is the Minimum Roof Pitch?

The stated minimum pitch is:

15°

What Size Is an eQube Solar Tile?

The stated cover dimensions are:

1260mm x 320mm

with a stated height of:

1.5mm

How Much Does an eQube Tile Weigh?

Each tile weighs approximately:

3.1kg

What Colour Is the eQube Solar Tile?

The base tile is supplied in:

Charcoal with a matte finish

What Roof System Does eQube Work With?

eQube is designed to integrate into the:

Metrotile Qube roofing system

Compatibility and layout should be confirmed as part of the complete roof and photovoltaic system design.

What Connectors Does eQube Use?

Each tile is supplied with a rear-mounted, double-insulated, UV-resistant:

MC4 connector cable

This forms part of the plug-and-play connection system.

What Fixings Are Required?

The specified roof fixing is:

35mm Metrotile Self Drilling Screws

Installation should follow the current Metrotile technical requirements.

What Warranty Does Metrotile eQube Have?

The supplied warranty information states:

• 10-year product warranty
• 25-year installation and performance warranty

Applicable warranty conditions should be checked for the proposed installation.

Is eQube Better Looking Than Conventional Solar Panels?

eQube is specifically designed for customers who want a more integrated solar roof appearance.

Because the photovoltaic tiles sit within the Metrotile Qube roof covering, they create significantly less additional height than a conventional above-roof panel arrangement.

Whether this is preferable will depend on the project’s aesthetic, technical and budget requirements.

Interested in a Metrotile eQube Solar Roof?

Solar roof design requires more than simply calculating the number of tiles from the roof area. Factors including roof orientation, pitch, shading, desired system output, electrical design and available roof space all affect the final specification.

For an upcoming eQube project, we can put you in contact with the Metrotile technical team, who can provide the technical information required to develop the appropriate roofing and solar specification.

Why Choose the Metrotile eQube Solar Roof Tile?

The Metrotile eQube Solar Roof Tile combines photovoltaic electricity generation with the sleek appearance and lightweight construction of the Metrotile Qube roofing system.

Each tile provides a stated maximum output of 60W, weighs just 3.1kg and integrates directly into the surrounding Qube roof covering. With a minimum pitch of 15°, rear-mounted MC4 connectivity and a low-profile Charcoal matte finish, eQube provides an alternative to conventional above-roof solar panels where aesthetics and roof integration are important.

For customers searching for solar roof tiles, Metrotile eQube, integrated solar roof tiles, photovoltaic roof tiles, solar roofing systems, lightweight solar roof tiles or alternatives to conventional solar panels, eQube provides a purpose-designed integrated solar option for compatible Metrotile Qube roofs.