Bond It Flashing Tape – Grey

Bond It Flashing Tape – Grey is a crease-resistant, lead-coloured self-adhesive flashing and waterproof repair tape designed for roofing repairs, flashing applications and general weatherproof sealing.

Suitable for flat and pitched roofs, it can be used for replacement and repair of flashings, sealing around chimney stacks, rooflights, parapets, flues, RSJs, guttering, extractor vents and other compatible roofing details.

The strong facing provides resistance to puncturing, while the flexible bituminous adhesive provides excellent adhesion without the problems of slump.

Available in a choice of 50mm to 600mm widths, with different roll lengths and pack quantities according to the size selected.

Available Bond It Flashing Tape Sizes

The different widths provide options for everything from narrow joint sealing and detailed repairs through to much wider flashing and waterproofing applications.

Self-Adhesive Flashing Tape for Roof Repairs

Bond It Flashing Tape provides a fast and convenient solution for a wide variety of roofing, flashing and waterproof repair applications.

Typical uses include:

• Replacement and repair of flashings
• Flat roof repairs
• Pitched roof repairs
• Chimney stack detailing
• Parapet sealing
• Downpipe repairs
• Rooflight sealing
• Glazing details
• Flue sealing
• RSJ sealing
• Concrete column sealing
• Guttering repairs
• Extractor vent sealing
• Waterproofing coping details
• Roof ridge waterproofing
• General water-sealing repairs

Widths from 50mm to 600mm

Bond It Flashing Tape is available in seven size and pack combinations, allowing the most appropriate width to be selected for the particular roofing or sealing detail.

Narrower 50mm and 75mm tapes provide a practical option for smaller joints and detailed repair work.

The 100mm, 150mm and 225mm widths provide progressively wider coverage for general flashing, roof repair and waterproofing applications.

For significantly wider details, 450mm and 600mm rolls are available individually in 10m lengths.

Lead-Coloured Grey Finish

Bond It Flashing Tape has a grey, lead-coloured finish, providing the appearance associated with traditional lead flashing while using a flexible self-adhesive flashing tape construction.

It can therefore provide a practical solution for visible roof repairs and flashing details where a grey finish is preferred.

Suitable for Flat and Pitched Roofs

Bond It Flashing Tape is designed for flashing and repair applications on both flat and pitched roofs.

Its flexible construction allows it to conform readily to different roofing details and awkward contours, making it useful around junctions, penetrations and other areas requiring weather protection.

Replacement and Repair of Flashings

Bond It Flashing Tape can be used for both replacement and repair of suitable flashing details.

The wide range of available widths makes it possible to select a tape appropriate for smaller repairs or significantly wider flashing applications.

Chimneys and Parapets

The tape is suitable for compatible flashing and sealing applications around chimney stacks and parapets.

Its flexible construction allows it to follow different contours and junctions while providing weather protection to the repaired area.

Rooflights and Glazing

Bond It Flashing Tape can be used for sealing glazing and rooflights where the surfaces and construction are compatible.

It is particularly useful for general waterproof sealing around roof openings and junctions where a flexible self-adhesive material is required.

Flues, RSJs and Extractor Vents

The tape can also be used for compatible sealing around:

• Flues
• RSJs
• Concrete columns
• Extractor vents
• Roof penetrations

Its ability to conform readily to awkward contours makes it useful for detailed waterproofing and repair work.

Guttering and Downpipe Repairs

Bond It Flashing Tape can be used for suitable gutter and downpipe sealing and repair applications.

The narrower widths can be particularly useful for localised repairs where a full-width flashing material is unnecessary.

Flexible Bituminous Adhesive

The bituminous component of Bond It Flashing Tape provides flexibility and adhesion while being designed to avoid problems associated with slump.

This combination allows the tape to conform to suitable roof details while maintaining an effective bond to correctly prepared compatible surfaces.

Crease-Resistant and Puncture-Resistant Facing

Bond It Flashing Tape features a crease-resistant facing designed to provide a practical finish during installation.

The strength of the facing also provides resistance to puncturing, helping protect the tape during installation and use.

Conforms to Awkward Contours

Bond It Flashing Tape readily conforms to awkward contours, making it particularly useful around irregular roof details and penetrations.

This flexibility can simplify repairs around areas such as chimneys, rooflights, flues and other junctions where rigid materials can be more difficult to form.

Suitable for Multiple Substrates

Bond It Flashing Tape can be used for compatible flashing, roofing and general water-sealing repairs on:

• Masonry
• Asbestos
• Timber
• Metal
• Glass

The substrate should always be checked for suitability and correctly prepared before installation.

Fast and Clean Application

Bond It Flashing Tape is supplied in rolls for fast and clean application.

No specialist tools or skills are required for general application, making it a convenient product for both planned roofing work and maintenance repairs.

Key Benefits

• Self-Adhesive: Designed for fast application to compatible prepared surfaces.
• Lead-Coloured Grey Finish: Provides a traditional-looking grey flashing appearance.
• Multiple Widths: Available from 50mm through to 600mm.
• Flat and Pitched Roofs: Suitable for a broad range of roofing applications.
• Flexible Bituminous Adhesive: Provides flexibility and adhesion without problems associated with slump.
• Crease Resistant: Designed for practical installation and a neat finish.
• Puncture Resistant: Strong facing provides resistance to puncturing.
• Conforms to Awkward Contours: Useful around roof penetrations and detailed junctions.
• Multi-Surface Compatibility: Suitable for compatible masonry, asbestos, timber, metal and glass.
• Versatile Applications: Suitable for flashings, rooflights, chimneys, parapets, gutters, downpipes, flues and general roof repairs.
• No Specialist Tools Required: Designed for straightforward application.
• Multiple Pack Sizes: Pack quantity varies according to tape dimensions.

Product Specification

• Manufacturer: Bond It
• Product: Flashing Tape
• Product Type: Self-Adhesive Flashing and Waterproof Repair Tape
• Colour: Grey / Lead Coloured
• Adhesive: Bituminous
• Available Widths: 50mm, 75mm, 100mm, 150mm, 225mm, 450mm and 600mm
• Available Roll Lengths: 3m and 10m
• Suitable Roof Types: Flat and Pitched
• Suitable Substrates: Masonry, Asbestos, Timber, Metal and Glass
• Pack Quantity: 1, 2, 4, 6, 8 or 12 Rolls Depending on Size
• Typical Applications: Flashing Repairs, Roof Repairs, Rooflights, Parapets, Chimneys, Guttering, Downpipes, Flues and General Waterproof Sealing

What Is Bond It Flashing Tape Used For?

Bond It Flashing Tape is used for general roofing, flashing and waterproof sealing repairs.

Typical applications include replacing or repairing flashings, sealing rooflights, repairing downpipes, sealing parapets and waterproofing coping and roof ridge details.

It can also be used for compatible sealing around chimney stacks, RSJs, flues, concrete columns, guttering and extractor vents.

What Sizes of Bond It Flashing Tape Are Available?

Bond It Flashing Tape is available in:

• 10m x 50mm, Box of 12
• 10m x 75mm, Box of 8
• 3m x 100mm, Box of 6
• 3m x 150mm, Box of 4
• 3m x 225mm, Box of 2
• 10m x 450mm, 1 Roll
• 10m x 600mm, 1 Roll

This provides widths ranging from 50mm to 600mm for different repair and flashing requirements.

Is Bond It Flashing Tape Self-Adhesive?

Yes. Bond It Flashing Tape is self-adhesive.

Its bituminous layer provides flexibility and adhesion to compatible prepared surfaces.

Is Flashing Tape the Same as Lead Flashing?

No. Bond It Flashing Tape has a lead-coloured appearance, but it is a self-adhesive flashing tape rather than traditional sheet lead.

It provides a convenient solution for suitable flashing, repair and general waterproofing applications.

Can Bond It Flashing Tape Be Used on Flat and Pitched Roofs?

Yes. Bond It Flashing Tape is designed for use on both flat and pitched roofs.

It can be used for general roofing repairs and a range of suitable flashing and waterproofing details.

Can It Be Used Around Chimneys?

Yes. Chimney stacks are one of the specified applications for Bond It Flashing Tape.

Its flexible construction allows it to conform to compatible chimney and roof junction details.

Can It Be Used Around Rooflights?

Yes. Bond It Flashing Tape is suitable for sealing glazing and rooflights, subject to the surfaces and application being compatible with the product.

Can It Be Used Around Flues?

Yes. Bond It Flashing Tape can be used for compatible sealing applications around flues.

Any application around a flue must also be suitable for the temperatures, clearances and construction requirements of the particular flue system.

What Surfaces Can Bond It Flashing Tape Be Applied To?

Bond It specifies the tape for general flashing and water-sealing repairs on:

• Masonry
• Asbestos
• Timber
• Metal
• Glass

Correct surface preparation is important for achieving effective adhesion.

Do I Need Special Tools to Apply Bond It Flashing Tape?

Bond It states that no special skills or tools are required.

The product is supplied in rolls for fast and clean application and is designed to readily conform to awkward contours.

Which Width of Flashing Tape Should I Choose?

The appropriate width depends on the dimensions and design of the detail being sealed.

Bond It Flashing Tape is available from 50mm up to 600mm wide, allowing customers to select a width appropriate for anything from smaller sealing repairs to substantially wider flashing and waterproofing applications.

Always ensure sufficient tape width is available to provide the required coverage and adhesion to the surrounding surfaces.

Why Choose Bond It Flashing Tape?

Bond It Flashing Tape provides a versatile solution for roof flashing repairs, waterproof sealing and general roof maintenance.

Its strong crease-resistant facing provides puncture resistance, while the flexible self-adhesive bituminous layer provides adhesion and flexibility without the problems associated with slump.

Available in widths from 50mm to 600mm, the range covers smaller repair and sealing jobs as well as significantly wider flashing and waterproofing details.

Its ability to conform to awkward contours makes it useful around chimneys, rooflights, parapets, flues, RSJs, gutters, downpipes and extractor vents, while compatibility with masonry, timber, metal and glass provides broad application potential.

For customers searching for grey flashing tape, self-adhesive flashing tape, roof repair tape, lead-coloured flashing tape, chimney flashing tape, rooflight sealing tape or waterproof roofing tape, Bond It Flashing Tape provides a flexible range of sizes for professional roofing and repair work.

Please note: Always ensure the substrate and application are suitable and correctly prepared before installation. Follow the current Bond It technical and application instructions. Where working with asbestos-containing materials, appropriate legal requirements, risk controls and safe working procedures must be followed.