We offer our very best prices upfront to Trade & DIY alike
Payments Secured by Stripe
Fast Nationwide Delivery Available
See our 1400+ reviews on Trustpilot.
Payments Secured by Stripe
Quality Products To Your Door
See our 1400+ reviews on Trustpilot
£30.50 Original price was: £30.50.£28.98Current price is: £28.98. Inc VAT
Free Delivery on Novia orders over £1200 (incl VAT)
£30.50 Original price was: £30.50.£28.98Current price is: £28.98. Inc VAT
Free Delivery on Novia orders over £1200 (incl VAT)
Everyday Low Prices
Our huge buying power with leading manufacturers means lower prices for you
Novia UV Ultraviolet Lap Tape (UVLT) is a high-performance single-sided sealing and bonding tape designed for membrane overlaps, joints and edges where enhanced UV resistance is required. Featuring a high-strength acrylic dispersion adhesive, elastic LDPE film carrier and scrim reinforcement, it is particularly suited to open facade and rainscreen applications using UV-resistant breather membranes.
Novia UVLT provides up to 24 months UV stability in suitable open rainscreen applications, subject to specified exposure conditions. It can also be used for sealing overlaps and joints in standard roof breather membrane applications where additional UV resistance is desirable.
Supplied as a 75mm wide x 25m long roll.
Key benefits include:
Novia UVLT is designed for sealing and bonding membrane overlaps, joints and edges, particularly where the membrane installation is subject to increased UV exposure.
Typical applications include:
Its enhanced UV stability makes it particularly suited to open facade applications where sections of the membrane remain exposed through gaps within the finished facade.
Open facade and rainscreen systems can leave portions of the breather membrane behind the cladding exposed to sunlight through open joints.
Novia UV Ultraviolet Lap Tape is specifically designed for these applications, providing a high level of UV resistance for sealing membrane laps and edges.
Novia states that UVLT provides 24 months UV stability in open rainscreen applications where:
These exposure limitations should be observed when specifying and installing the tape.
Novia UVLT provides up to 24 months UV stability within suitable open rainscreen applications.
This performance applies where the maximum open joint width is 30mm and exposed membrane represents 40% or less of the total membrane area.
The tape should be installed according to the relevant Novia membrane and tape technical guidance for the specific project.
Novia UVLT uses a high-strength acrylic dispersion adhesive designed to provide effective bonding and sealing within appropriate membrane installations.
Correct surface preparation and installation are important to achieving an effective bond.
The requirements of the relevant Novia technical datasheets should be followed when installing the tape.
The tape incorporates an elastic LDPE film carrier, providing flexibility for membrane sealing and detailing applications.
This is combined with scrim reinforcement to create a strong tape suitable for demanding membrane joints and overlaps.
Novia UVLT is reinforced with scrim, helping provide strength and stability to the tape during installation and service.
The combination of:
makes UVLT particularly suited to sealing UV-resistant breather membranes within open facade systems.
Correctly sealing breather membrane overlaps helps protect joints against external environmental conditions.
Novia UVLT is designed to seal these membrane laps while also contributing towards improved airtightness of the completed construction.
Particular attention should be given to:
Novia UVLT can be used to seal membrane overlaps and help reduce air leakage through the completed membrane installation.
For breather membrane applications where improved airtightness is required, Novia recommends using UVLT in conjunction with Novia Double Sided Lap Tape (DSLT).
Using the two products together creates a higher-specification membrane sealing system.
Novia UVLT is particularly suited for use with UV-resistant breather membranes such as Novia UV Facade FR.
It can be used as an edge and lap sealing tape, helping maintain the integrity of the membrane installation while providing the enhanced UV resistance required within suitable open facade applications.
Although particularly suited to open facade wall applications, Novia UVLT can also be used for overlaps and joints on breather membranes within standard roof applications where additional protective UV resistance is required.
The relevant breather membrane technical datasheet should be consulted to determine the required sealing arrangement for the individual roof installation.
Where improved airtightness is required, Novia recommends a two-tape sealing system.
This can combine:
Novia UV Ultraviolet Lap Tape (UVLT)
Used as the single-sided tape for sealing membrane laps and overlaps.
Novia Double Sided Lap Tape (DSLT)
Used within the membrane joint as part of the sealing system.
This arrangement can provide a high-specification finish while further reducing air leakage through the membrane installation.
Additional sealing tapes may be required with certain breather membranes to comply with BS 5534 wind uplift requirements.
Requirements can vary according to the membrane, installation and geographical location.
The individual Novia breather membrane technical datasheet should therefore be consulted for the applicable guidance and geographical data.
Where required, a two-tape system incorporating a single-sided lap tape such as Novia UVLT or Novia Breather Membrane Lap Tape (BMLT) together with Novia Double Sided Lap Tape (DSLT) can be used.
Both Novia UVLT and Novia Breather Membrane Lap Tape can be used as single-sided membrane lap sealing tapes, but they are intended for different requirements.
Novia UV Ultraviolet Lap Tape (UVLT) provides enhanced UV resistance and is particularly suited to open facade and UV-resistant breather membrane applications.
Novia Breather Membrane Lap Tape (BMLT) is designed for general breather membrane lap sealing applications where the additional UV performance of UVLT is not required.
UVLT is therefore the more appropriate option where increased exposure to ultraviolet light forms part of the application requirements.
Each roll of Novia UVLT measures:
75mm wide x 25m long
The 75mm width provides a substantial sealing surface across membrane laps, joints and edges, while each roll provides 25 linear metres of tape.
The quantity required will depend on the total length of membrane joints, overlaps, edges and other details requiring sealing.
| Specification | Details |
|---|---|
| Product | Novia UV Ultraviolet Lap Tape |
| Abbreviation | UVLT |
| Product Type | UV-Resistant Membrane Lap Tape |
| Width | 75mm |
| Roll Length | 25m |
| Adhesive | High-Strength Acrylic Dispersion Adhesive |
| Carrier | Elastic LDPE Film |
| Reinforcement | Scrim |
| UV Resistance | High |
| UV Stability | Up to 24 Months* |
| Maximum Open Joint Width | 30mm* |
| Maximum Exposed Membrane Area | 40%* |
| Primary Application | Open Facade Breather Membrane Sealing |
| Other Applications | Roof & Wall Breather Membrane Laps |
| Suitable for Airtightness Detailing | Yes |
*24-month UV stability applies to suitable open rainscreen applications with maximum joint widths up to 30mm and where no more than 40% of the total membrane area is exposed.
Novia UVLT is a UV-resistant sealing and bonding tape designed for sealing the laps, joints and edges of suitable breather membranes.
It is particularly suited to open facade applications where enhanced resistance to UV exposure is required.
Each roll measures 75mm wide x 25m long.
Each roll provides 25 linear metres of UV-resistant membrane sealing tape.
Novia UVLT uses a high-strength acrylic dispersion adhesive.
Yes. The tape incorporates scrim reinforcement together with an elastic LDPE film carrier.
Yes. Novia UVLT has been specifically designed with high UV resistance for applications such as open facade breather membrane systems.
Novia specifies 24 months UV stability in suitable open rainscreen applications.
This applies where open joint widths are no greater than 30mm and no more than 40% of the total membrane area is exposed.
Yes. Open facade and rainscreen applications are a primary application for Novia UVLT, subject to the specified limits for joint width and exposed membrane area.
Yes. Novia UVLT can be used with Novia UV Facade FR as an edge and lap sealing tape.
Yes. The tape can also be used for sealing overlaps and joints on breather membranes within standard roof applications where additional UV resistance is desired.
Yes. Sealing membrane laps and joints with UVLT can help reduce air leakage and improve the airtightness of the membrane installation.
For applications requiring improved airtightness, Novia recommends using UVLT together with Novia Double Sided Lap Tape.
A two-tape system uses both a double-sided tape within the membrane joint and a single-sided tape across the completed overlap.
Novia recommends combinations such as UVLT with DSLT where a high-specification sealed membrane joint is required.
Additional sealing tapes are required with some breather membranes according to BS 5534 wind uplift requirements.
The appropriate Novia breather membrane datasheet should be checked for specific guidance and geographical requirements.
Novia UVLT provides enhanced UV resistance and is particularly suited to open facade and other applications where additional UV exposure is expected.
Novia BMLT is a general breather membrane lap tape for standard membrane sealing applications.
Each roll contains 25 linear metres of tape.
The quantity required will depend on the total length of membrane overlaps, joints, edges and other details that require sealing. Allowance should also be made for cutting and installation wastage.
Novia UV Ultraviolet Lap Tape provides a high-performance sealing solution for breather membrane overlaps, joints and edges where enhanced UV resistance is required.
Its high-strength acrylic dispersion adhesive, elastic LDPE film carrier and scrim reinforcement make it particularly suited to open facade applications using UV-resistant breather membranes such as Novia UV Facade FR.
The tape provides up to 24 months UV stability in suitable open rainscreen applications, subject to maximum open joint widths of 30mm and no more than 40% membrane exposure.
Supplied as a 75mm x 25m roll, Novia UVLT can also be used within standard roof breather membrane applications and as part of a two-tape sealing system with Novia Double Sided Lap Tape for improved airtightness.
| Technical Data Sheet |
Rated as Excellent on Trustpilot
Our customer service is rated as excellent on Trustpilot where we have over 1500 genuine customer reviews.
Customers also bought
As a family-run business, your trust really matters to us. That’s why all orders and payments are placed securely through our website, helping to keep your details safe and your order processed correctly.
We use your card issuer’s 3D Secure checks, and all payments are encrypted and handled securely by Stripe, a trusted payment provider. We never see or store your card details, so you can order with confidence knowing you’re in safe hands with Roofin Online.
We offer nationwide delivery on most products.
Delivery times are in working days (excluding weekends and bank holidays). Orders placed after 12 noon are processed from the next working day.
Some products and locations have delivery restrictions. Available options and costs are calculated automatically at checkout.
We offer free Click & Collect on most products in our online shop.
Available collection locations are displayed automatically in your basket and at checkout, based on the products you’re ordering.
We’ll contact you when your order is ready for collection. Please wait for confirmation before travelling.
Rated as Excellent
Our customer service is rated as excellent on Trustpilot where we have over 1500 genuine customer reviews.
We use cookies to improve your browsing experience and show personalised or non-personalised ads. You can accept, deny or manage your preferences at any time.