REGUPOL Walkway Flat Roof Maintenance Path – Green – 1m x 500mm x 30mm

Minimum Order: 10

Safe paths on flat roofs

REGUPOL walkway standard, the elastic roof and paving tiles for building and marking maintenance routes on flat roofs and protection from the sealing system according to DIN 18531. The material is fire-retardant, drainable, highly visible and slip-resistant when wet with a general appraisal certificate for fire class BROOF (t1), so-called „hard roof“, by its fire-retardant finish.

The elastic roof and walkway tiles REGUPOL walkway standard are used for maintenance paths on flat roofs with photovoltaic, solar, antenna or other technical installations. As a protective membrane, the dense, viscoplastic material protects the waterproofing from damage.

A simple dowel plug-in system makes the panels easy to lay and connect to form homogenous surfaces or maintenance paths that are ready for use immediately. The material is flame-retardant and, when laid over the entire surface, is classified as “hard roofing” with its B_ROOF (t1) classification in accordance with DIN EN 13501-5.

REGUPOL walkway standard is resistant to flying sparks and radiant heat and reduces the fire load on flat roofs – as attested by the general building authority approval certificate P-MPA-E-21-507.

The available colours, red and black, clearly mark the maintenance paths even in poor visibility. Their undersides have criss-crossing drainage grooves so that they can be laid in any position relative to the direction of slope. REGUPOL walkway standard tiles can be laid directly on bituminous membranes, though an additional aluminium lamination is required with some plastic waterproofing (PVC-soft).

Our REGUPOL walkway standard tiles consist of up to 95% PUR-bonded, recovered and recycled rubber granules and are therefore a perfect example of the circular economy, or upcycling, in practice.

REGUPOL Walkway Flat Roof Maintenance Path Features:

• REGUPOL walkway standard is used as a protective layer and to mark maintenance paths.
• Application: constructing and marking maintenance paths and working areas for photovoltaic, solar, antenna or technical systems on flat roofs.
• Lower weight compared to concrete paving slabs enables installation even where static restrictions are in force.
• Can be laid on all rubber-compatible waterproofing systems on flat roofs.
• This high-density material is open to water vapour diffusion, is viscoplastic and protects waterproofing systems from damage.
• The flame-retardant finish ensures resistance to flying sparks and radiant heat. The product is therefore classified as ‘hard roofing’ (BROOF t1).
• Safety: resistance to flying sparks and radiant heat reduces fire load on flat roofs.
• Material thickness of 30 and 43 mm, depending on requirements and wind load, available from stock in red and black. Other colours on request.
• Drainage system on the underside to prevent waterlogging.

Available Dimensions:
1m x 500mm x 30mm