We offer our very best prices upfront to Trade & DIY alike
Payments Secured by Stripe
Fast Nationwide Delivery Available
See our 1400+ reviews on Trustpilot.
Payments Secured by Stripe
Quality Products To Your Door
See our 1400+ reviews on Trustpilot
£16.06 Original price was: £16.06.£12.05Current price is: £12.05. Inc VAT
Delivery from £24 - Calculated during checkout based on your address and quantity.Also available for Free Click & Collect from Ruthin, LL15*
£16.06 Original price was: £16.06.£12.05Current price is: £12.05. Inc VAT
Delivery from £24 - Calculated during checkout based on your address and quantity.Also available for Free Click & Collect from Ruthin, LL15*
Everyday Low Prices
Our huge buying power with leading manufacturers means lower prices for you
The Pedeck Fixed Height Paver Support – 14mm is a low-profile paving pedestal designed for loose-laid porcelain tiles and compatible paving slabs on patios, balconies, roof terraces and other suitable hard surfaces.
With a nominal 14mm support height, integrated drainage channels and 4mm wide spacer ribs, the support provides a simple and cost-effective way to create a raised paving surface with consistent joints and drainage beneath.
The Pedeck 14mm Paver Support can also be stacked to increase the support height, while compatible levelling shims provide fine adjustment in small increments where required.
At just 14mm high, the Pedeck Fixed Height Paver Support provides a particularly low-profile solution for raised paving.
It is ideal where the available build-up between the substrate and required finished paving level is limited.
Typical applications include:
The 14mm support height makes this Pedeck pedestal particularly useful around areas where threshold clearance is restricted.
This can include:
Suitable paving can be raised above the substrate without the greater build-up associated with conventional adjustable pedestal systems.
The Pedeck Fixed Height Paver Support incorporates 14mm high x 4mm wide spacer ribs.
These ribs help position adjacent paving slabs while creating consistent 4mm joints between suitable tiles or pavers.
Consistent open joints are particularly useful in raised paving systems because they allow rainwater to pass between the paving and reach the drainage surface underneath.
Water channels are incorporated into the base of the support to help maintain drainage beneath the raised paving.
Rainwater can pass through the open paving joints before reaching the substrate below, where it can continue towards the appropriate drainage outlets.
This makes the Pedeck Fixed Height Paver Support particularly useful for external applications such as:
The complete substrate should still be designed with suitable falls and drainage provision.
The Pedeck Fixed Height Paver Support provides a simple loose-lay installation system.
Suitable porcelain paving or slabs are positioned directly onto the supports rather than being installed into a conventional mortar bed.
This can provide several advantages:
The Pedeck 14mm Paver Support can provide a practical solution for installing suitable raised paving over an existing solid patio or hard surface.
Where the existing substrate is structurally suitable, pedestal-supported paving can potentially avoid the need to completely remove and reconstruct the original patio.
This can be particularly useful where the objective is to:
The condition, stability and drainage of the existing substrate should be assessed before installation.
Raised paving creates a drainage void between the finished slabs and substrate.
This can be useful where water needs to travel beneath the finished paving towards existing drainage points.
However, pedestal supports do not themselves correct an inadequate drainage design. Existing ponding, falls, outlets and the suitability of the underlying construction should be assessed before covering the surface.
Where more than 14mm of support height is required, compatible Pedeck Fixed Height Paver Supports can be stacked.
This provides a simple way to increase the paving height while retaining the fixed-height support system.
The suitability and permitted number of stacked supports should be considered according to the required height, paving dimensions, loading and complete installation.
For significantly greater heights, an adjustable Pedeck pedestal system may provide a more appropriate solution.
Where small variations in paving height need to be corrected, compatible levelling shims can be used with the support.
Shims allow individual support positions to be increased in small increments, helping compensate for minor variations in:
Compatible 1mm and 3mm Pedeck Levelling Rings are also available within the wider system for fine height adjustment.
The main support provides a nominal 14mm fixed height.
The supplied technical dimensions indicate a usable range of approximately 14mm to 18mm when the appropriate levelling components are incorporated.
This allows fine adjustment without immediately moving to a taller pedestal system.
For perimeter, edge and corner details, the fixed height support can be divided where appropriate.
This allows the support to be adapted for positions where a complete pedestal cannot be accommodated, such as:
Care should be taken to ensure that the remaining support provides appropriate and stable bearing for the paving.
The low-profile Pedeck Fixed Height Paver Support is suitable for compatible roof terrace paving systems where only a small amount of build-up is available.
Raised paving allows water to pass through the joints and reach the waterproofing and drainage surface underneath.
The underlying roof can therefore retain its required drainage fall while the paving is supported independently above.
Compatibility with the specific waterproofing system and complete roof construction should always be confirmed.
Balconies often have limited clearance between the supporting surface and door thresholds.
At just 14mm high, the Pedeck Fixed Height Paver Support provides a particularly low-profile option for compatible balcony paving.
The balcony structure, waterproofing, drainage provision and available threshold height should all be considered when specifying the complete paving system.
Fixed-height supports can be used as part of suitable raised paving systems over compatible roof constructions.
Where supports are positioned directly over a waterproofing membrane, compatibility with the particular membrane should be confirmed.
A suitable protective or separation layer may be required by the waterproofing manufacturer.
The Pedeck Fixed Height Paver Support is manufactured from moulded polypropylene for use in suitable indoor and outdoor paving applications.
The material provides a lightweight and practical support for raised paving installations.
Suitable applications include:
A fixed height paver support is a low-profile pedestal positioned beneath compatible paving slabs to create a raised loose-laid paving surface.
Unlike an adjustable pedestal, the main support has a predetermined height.
Fine adjustments can be achieved using compatible shims, while supports can be stacked where a greater height is required.
The main Pedeck support is 14mm high.
Compatible levelling components can be used to provide small increases in height where required.
The integrated spacer ribs are approximately 4mm wide, helping create consistent 4mm joints between compatible paving slabs.
These open joints also allow rainwater to drain through the raised paving surface.
Yes. The support is suitable for compatible porcelain paving systems.
The dimensions, thickness and structural properties of the porcelain slabs should be appropriate for pedestal-supported installation.
The quantity required depends on the size, layout and support requirements of the paving slabs.
In a typical installation, supports are positioned beneath the paving corners, with adjacent slabs sharing supports where appropriate.
For example, a regular grid of paving may use one support at each intersection.
Larger paving formats, cut slabs, perimeter details or particular loading conditions may require additional supports.
The requirements of the paving manufacturer should always be followed.
Yes. The fixed height supports are designed to be stacked to increase the paving height.
For substantially greater build-ups, an adjustable pedestal system may provide a more suitable solution.
Yes. Compatible levelling shims can be used to increase individual support positions in small increments.
This is useful where minor differences in substrate level or paving thickness need to be compensated for.
The supports can be divided where appropriate for perimeter and corner details.
This allows the support to be adapted where a complete unit cannot be positioned beneath the paving.
The resulting support arrangement must still provide stable and appropriate bearing for the slab.
Potentially, yes.
Where the existing patio is sufficiently solid, stable and suitable, fixed height supports can provide a way of creating a raised porcelain surface above it without installing the new paving into a conventional mortar bed.
Existing drainage, thresholds and structural suitability should be assessed before installation.
Raised pedestal paving generally uses open joints rather than conventional grout.
The spacer ribs help maintain consistent joints between the paving slabs while allowing water to pass through to the drainage surface underneath.
Yes. The 4mm joints allow rainwater to pass between suitable paving slabs.
Integrated channels within the support then help maintain water movement beneath the paving.
The underlying surface still needs appropriate drainage falls and outlets.
Yes. The 14mm support is particularly useful for low-profile roof terrace paving where available build-up is limited.
Compatibility with the waterproofing membrane, insulation, roof structure and complete paving system should be confirmed before installation.
A fixed height support provides a predetermined base height and is best suited to low-level installations where only limited adjustment is required.
An adjustable pedestal provides a much greater range of height adjustment and is generally more appropriate where substrate levels vary significantly or a larger paving void is required.
The Pedeck range includes both fixed and adjustable solutions, allowing the appropriate support to be selected according to the project.
The Pedeck Fixed Height Paver Support – 14mm provides a simple and cost-effective solution for creating low-profile raised porcelain paving.
With a 14mm support height, integrated 4mm spacer ribs, drainage channels, stackable construction and compatibility with fine levelling shims, the support is ideal for patios, balconies, roof terraces and other applications where paving build-up needs to be kept to a minimum.
Its loose-lay installation also makes it particularly useful for suitable refurbishment projects, including installing new porcelain paving over an existing solid patio or hard surface.
| Download TDS |
| Weight | 1.35 kg |
|---|
Rated as Excellent on Trustpilot
Our customer service is rated as excellent on Trustpilot where we have over 1500 genuine customer reviews.
Customers also bought
As a family-run business, your trust really matters to us. That’s why all orders and payments are placed securely through our website, helping to keep your details safe and your order processed correctly.
We use your card issuer’s 3D Secure checks, and all payments are encrypted and handled securely by Stripe, a trusted payment provider. We never see or store your card details, so you can order with confidence knowing you’re in safe hands with Roofin Online.
We offer nationwide delivery on most products.
Delivery times are in working days (excluding weekends and bank holidays). Orders placed after 12 noon are processed from the next working day.
Some products and locations have delivery restrictions. Available options and costs are calculated automatically at checkout.
We offer free Click & Collect on most products in our online shop.
Available collection locations are displayed automatically in your basket and at checkout, based on the products you’re ordering.
We’ll contact you when your order is ready for collection. Please wait for confirmation before travelling.
Rated as Excellent
Our customer service is rated as excellent on Trustpilot where we have over 1500 genuine customer reviews.
We use cookies to improve your browsing experience and show personalised or non-personalised ads. You can accept, deny or manage your preferences at any time.