We offer our very best prices upfront to Trade & DIY alike
Payments Secured by Stripe
Fast Nationwide Delivery Available
See our 1400+ reviews on Trustpilot.
Payments Secured by Stripe
Quality Products To Your Door
See our 1400+ reviews on Trustpilot
£21.98 Inc VAT
Free Delivery on orders over £900 (incl VAT)
£21.98 Inc VAT
Free Delivery on orders over £900 (incl VAT)
Everyday Low Prices
Our huge buying power with leading manufacturers means lower prices for you
SAMAC Galvanised Snow Guard – 2m x 150mm (6″) provides a practical solution for helping prevent slipping snow and loose roof tiles from falling from pitched roofs.
Installed at the eaves using suitable snow guard brackets, the galvanised snow guard creates a physical barrier designed to retain snow and help prevent potentially hazardous material from sliding directly from the roof.
Manufactured with a galvanised finish for increased corrosion resistance, each section measures 2 metres long x 150mm (6 inches) high and can be combined with compatible SAMAC brackets and galvanised tying wire to create a complete roof snow retention system.
Snow accumulating on a pitched roof can begin to slide as temperatures and weather conditions change.
A correctly installed roof snow guard provides a physical barrier towards the lower section of the roof, helping retain slipping snow rather than allowing larger quantities to slide freely from the roof edge.
Snow guards can be particularly useful above areas such as:
The SAMAC Snow Guard can also help retain loose or slipping roof tiles and similar material at the roof edge.
The primary purpose of a roof snow guard is to help prevent accumulated snow from suddenly sliding from a pitched roof.
Snow sliding from a roof can create a hazard to people, vehicles and property below.
Installing a suitable snow retention system helps retain accumulated snow at roof level so that it can melt and disperse more gradually rather than sliding from the roof in a larger mass.
In addition to snow retention, the SAMAC Galvanised Snow Guard provides a physical barrier at the roof edge that can help prevent slipping or loose roof tiles from falling directly from the roof.
This makes snow guard mesh a practical safety feature for suitable pitched roofing applications.
Each SAMAC Snow Guard section measures 2 metres in length, allowing multiple sections to be installed alongside one another where longer roof elevations require protection.
The number of sections required will depend on the total roof length to be covered.
For example:
Allowances should be made for the actual installation arrangement and any required joining or overlapping of sections.
This version of the SAMAC Snow Guard measures 150mm high, equivalent to approximately 6 inches.
A larger 225mm (9″) high SAMAC Snow Guard is also available, allowing the appropriate size to be selected according to the requirements of the roof and snow retention installation.
The SAMAC Snow Guard features a galvanised finish, providing additional resistance to corrosion for external roofing applications.
As snow guard systems remain permanently exposed to rain, snow and changing weather conditions, the galvanised finish helps provide the durability required for long-term roof installations.
The 2m x 150mm snow guard can be combined with compatible SAMAC accessories to create a complete roof snow retention installation.
Available components include:
Different bracket sizes and profiles allow the installation to be configured according to the roof construction and required position of the snow guard.
A roof snow guard is a barrier installed towards the lower section of a pitched roof to help prevent accumulated snow from sliding freely from the roof edge.
Rather than allowing a larger mass of snow to suddenly leave the roof, a snow retention system helps hold it at roof level.
Snow guards can be particularly useful where pitched roofs are positioned above entrances, paths, driveways and other areas where falling or sliding snow could create a hazard.
The SAMAC Galvanised Snow Guard is designed to help prevent slipping snow and roof tiles from falling from pitched roofs.
It is installed using compatible supporting brackets to create a physical barrier along the required section of the roof.
Each section measures:
2 metres long x 150mm (6 inches) high.
Multiple 2m sections can be installed alongside one another where a longer continuous run of snow guard is required.
Yes. The SAMAC Snow Guard has a galvanised finish, providing additional corrosion resistance for permanent external roofing applications.
Several SAMAC bracket profiles are available depending on the roof construction and required position of the snow guard.
V Type brackets are designed for fixing the snow guard to suitable roof rafters.
They are available in 150mm (6″) and 225mm (9″) sizes.
Ogee brackets are designed to position the snow guard in front of the gutter, helping prevent leaves, moss and other debris retained by the snow guard from collecting within the gutter.
They are available in 150mm (6″) and 225mm (9″) sizes.
Half Round brackets position the snow guard behind the gutter, allowing leaves, moss and other roof debris to collect within the gutter for normal cleaning and maintenance.
They are available in 150mm (6″) and 225mm (9″) sizes.
The snow guard can be secured to compatible brackets using SAMAC Galvanised Tying Wire.
The 1.6mm galvanised tying wire is supplied in a 30m coil and can be cut to the required length for securing the snow guard to its supporting brackets.
Each section provides a nominal 2 metres of snow guard length.
To estimate the quantity required, divide the roof length to be protected by 2 and round up to the next complete section where necessary.
For example, for a 7.5m roof length:
7.5m ÷ 2m = 3.75 sections
Therefore, 4 x 2m snow guard sections would be required before allowing for any additional joining or installation requirements.
Snow guards are typically installed towards the eaves of a pitched roof, where they can form a barrier against snow and other material travelling down the roof slope.
The exact position and fixing arrangement will depend on the roof construction, roof covering, gutter arrangement and requirements of the complete snow retention system.
The appropriate bracket depends on the roof construction and where the snow guard needs to be positioned in relation to the gutter.
Choose a V Type bracket where the installation requires the snow guard to be fixed to suitable roof rafters.
Choose an Ogee bracket where the snow guard needs to sit in front of the gutter, helping prevent retained roof debris from collecting inside the gutter.
Choose a Half Round bracket where the snow guard needs to sit behind the gutter, allowing roof debris to enter the gutter.
Both 150mm (6″) and 225mm (9″) bracket options are available for compatible installations.
Both versions are 2 metres long and galvanised, with the primary difference being their height.
The smaller version measures 150mm (6″) high, while the larger SAMAC Snow Guard measures 225mm (9″) high.
The appropriate height should be selected according to the roof construction and requirements of the snow retention installation.
The SAMAC Galvanised Snow Guard provides a straightforward solution for creating a snow retention barrier on compatible pitched roofs.
Its 2 metre length and 150mm (6″) height provide a practical physical barrier for retaining slipping snow and helping prevent loose roof tiles from falling directly from the roof edge.
A galvanised finish provides additional protection against corrosion, while the range of compatible V Type, Ogee and Half Round brackets allows the snow guard position to be adapted to different roof and gutter arrangements.
For projects requiring a roof snow guard, galvanised snow guard mesh, pitched roof snow retention system, 150mm snow guard or 2m roof snow guard, the SAMAC system provides a versatile solution.
Please note: Snow loads can impose significant forces on a roof and its supporting fixings. The number, type, position and spacing of brackets should be appropriate for the roof construction and installation requirements. Suitable mechanical fixings should be used, and the existing roof structure should be capable of supporting the installed system and anticipated loads.
| Brand |
|---|
Rated as Excellent on Trustpilot
Our customer service is rated as excellent on Trustpilot where we have over 1500 genuine customer reviews.
Customers also bought
As a family-run business, your trust really matters to us. That’s why all orders and payments are placed securely through our website, helping to keep your details safe and your order processed correctly.
We use your card issuer’s 3D Secure checks, and all payments are encrypted and handled securely by Stripe, a trusted payment provider. We never see or store your card details, so you can order with confidence knowing you’re in safe hands with Roofin Online.
We offer nationwide delivery on most products.
Delivery times are in working days (excluding weekends and bank holidays). Orders placed after 12 noon are processed from the next working day.
Some products and locations have delivery restrictions. Available options and costs are calculated automatically at checkout.
We offer free Click & Collect on most products in our online shop.
Available collection locations are displayed automatically in your basket and at checkout, based on the products you’re ordering.
We’ll contact you when your order is ready for collection. Please wait for confirmation before travelling.
Rated as Excellent
Our customer service is rated as excellent on Trustpilot where we have over 1500 genuine customer reviews.
We use cookies to improve your browsing experience and show personalised or non-personalised ads. You can accept, deny or manage your preferences at any time.