We offer our very best prices upfront to Trade & DIY alike
Payments Secured by Stripe
Fast Nationwide Delivery Available
See our 1400+ reviews on Trustpilot.
Payments Secured by Stripe
Quality Products To Your Door
See our 1400+ reviews on Trustpilot
From: £6.79 Inc VAT
Free Delivery on orders over £900 (incl VAT)
From: £6.79 Inc VAT
Free Delivery on orders over £900 (incl VAT)
Everyday Low Prices
Our huge buying power with leading manufacturers means lower prices for you
The SupaClear PVC F Section / Drip Trim for Polycarbonate is a practical finishing accessory designed to provide a neat, professional edge to multiwall polycarbonate roofing sheets while helping to direct rainwater away from the exposed ends of the panels.
Manufactured from durable PVC, this F-shaped polycarbonate roofing trim is designed for use along the lower edge of polycarbonate roof sheets, particularly at the eaves, where effective water drainage and a clean finishing detail are important.
Available in 2000mm and 3000mm lengths, with options to suit 10mm twin-wall, 16mm triple-wall and 25mm triple-wall polycarbonate sheets, the SupaClear PVC F Section provides a convenient solution for both new roofing installations and replacement projects.
Choose from White, Brown or Grey to complement your polycarbonate roofing sheets, glazing bars and surrounding roof structure.
Ideal for conservatories, carports, lean-to roofs, pergolas, canopies and verandas, this lightweight PVC drip trim helps achieve a tidy, finished appearance while supporting effective rainwater runoff.
A polycarbonate F Section, also known as an F profile or drip trim, is a specialist roofing finishing accessory designed to fit along the exposed lower edge of multiwall polycarbonate roofing sheets.
The profile features an F-shaped cross-section, incorporating a channel that fits over the end of the polycarbonate sheet and a projecting lip that acts as a drip edge.
This design helps rainwater run off the roofing sheet and drip clear of the panel edge, reducing the tendency for water to track back underneath the roof covering.
In addition to its drainage function, the SupaClear PVC F Section provides a tidy finishing detail, concealing the exposed edge of the polycarbonate sheet and creating a more professional appearance.
It is commonly installed along the eaves of pitched polycarbonate roofs, including conservatories, carports and lean-to structures.
SupaClear PVC F Section Drip Trims are available in three sizes to accommodate different multiwall polycarbonate roofing sheet thicknesses.
| F Section Size | Suitable Polycarbonate Sheet |
|---|---|
| 10mm | 10mm Twin-Wall Polycarbonate |
| 16mm | 16mm Triple-Wall Polycarbonate |
| 25mm | 25mm Triple-Wall Polycarbonate |
Available Lengths:
Available Colours:
Select the F Section size that matches the thickness of your polycarbonate roofing sheet to ensure the profile fits correctly.
The SupaClear PVC F Section / Drip Trim is suitable for a wide range of domestic and commercial polycarbonate roofing applications, including:
The trim is particularly useful along the lower eaves edge of multiwall polycarbonate roofing sheets, where a neat finish and controlled rainwater runoff are required.
| Specification | Details |
|---|---|
| Product | SupaClear PVC F Section / Drip Trim |
| Material | PVC |
| Profile Type | F Section / Drip Edge |
| Available Lengths | 2000mm, 3000mm |
| Available Colours | White, Brown, Grey |
| Sheet Thickness Options | 10mm, 16mm, 25mm |
| Compatible Sheet Types | Twin-Wall and Triple-Wall Polycarbonate |
| Primary Application | Polycarbonate Roof Eaves Finishing |
| Function | Edge Finishing and Rainwater Drip Control |
| Suitable Applications | Conservatories, Carports, Pergolas, Canopies and Lean-To Roofs |
The projecting drip lip helps encourage rainwater to fall clear of the exposed polycarbonate sheet edge, reducing the likelihood of water tracking back underneath the roofing panel.
Exposed polycarbonate sheet edges can leave a roofing installation looking unfinished. An F Section provides a clean, continuous trim along the eaves for a more attractive appearance.
Available in 10mm, 16mm and 25mm sizes, SupaClear PVC F Sections can be selected to match the thickness of compatible multiwall polycarbonate roofing sheets.
PVC is lightweight and straightforward to cut, making the trim practical for both professional installers and DIY roofing projects.
White, Brown and Grey options make it easier to coordinate the F Section with existing glazing bars, roofing accessories and surrounding roof structures.
Correct installation helps ensure a neat finish and effective rainwater runoff from your polycarbonate roofing sheets.
Choose the SupaClear PVC F Section that corresponds to the thickness of your polycarbonate roofing sheet.
For example, use a 16mm F Section with compatible 16mm triple-wall polycarbonate sheets.
Measure the width of the polycarbonate roofing sheet or the eaves section where the trim will be fitted.
If necessary, cut the PVC F Section to the required length using a suitable fine-toothed saw.
Ensure the cut is straight and remove any rough edges before installation.
Ensure the polycarbonate sheet is correctly installed and that the open flutes have been finished using the appropriate breather tape or other sealing system recommended by the sheet manufacturer.
The F Section is a finishing accessory and should not be relied upon as the sole means of protecting the internal flutes from dirt, insects or moisture.
Position the F Section over the lower edge of the polycarbonate sheet, ensuring the drip lip faces downwards and outwards to direct rainwater away from the roof.
Fit the trim in accordance with the relevant roofing system manufacturer’s instructions, allowing for thermal expansion where required.
Ensure the profile is correctly seated, aligned and positioned to allow rainwater to drain freely from the roof edge.
Important: Follow the polycarbonate sheet manufacturer’s installation recommendations regarding edge closures, ventilation, thermal expansion and compatible fixing methods.
A polycarbonate F Section is used to finish the exposed lower edge of multiwall polycarbonate roofing sheets. Its projecting drip lip helps direct rainwater away from the sheet edge while providing a neat, professional finish.
SupaClear PVC F Sections are available in 10mm, 16mm and 25mm sizes to suit compatible twin-wall and triple-wall polycarbonate roofing sheets.
The F Section is available in 2000mm (2 metre) and 3000mm (3 metre) lengths.
SupaClear PVC F Section Drip Trims are available in White, Brown and Grey.
An F Section is typically fitted along the lower eaves edge of a polycarbonate roofing sheet, with the projecting drip lip positioned to help direct rainwater away from the roof edge.
Yes. PVC F Sections can be cut to the required length using a suitable fine-toothed saw, making them convenient for different roof widths and installation requirements.
The F Section helps finish and protect the exposed sheet edge, but it should not replace the appropriate breather tape or sealing system recommended for multiwall polycarbonate roofing sheets.
Yes. SupaClear PVC F Sections are suitable for compatible multiwall polycarbonate conservatory roofs, as well as carports, lean-to roofs, canopies and other similar roofing applications.
You should select the F Section size that matches your polycarbonate sheet thickness. Using an incorrectly sized profile may result in a poor fit or an insecure finishing detail.
A polycarbonate U Section is generally used as an edge closure or finishing profile, while an F Section incorporates an additional projecting lip designed to act as a drip edge.
This makes F Sections particularly useful along the eaves of polycarbonate roofing installations where rainwater runoff needs to be directed away from the sheet edge.
Finish your polycarbonate roofing installation with the SupaClear PVC F Section / Drip Trim, available in 2000mm and 3000mm lengths, three colour options and sizes suitable for 10mm, 16mm and 25mm polycarbonate roofing sheets.
Combine with compatible SupaClear Multiwall Polycarbonate Roofing Sheets, aluminium glazing bars, fixing buttons, breather tapes and other roofing accessories to create a complete, professional roofing system.
Whether installing a new conservatory roof, replacing existing polycarbonate panels or constructing a garden canopy, SupaClear PVC F Sections provide a practical solution for achieving a neat roof edge and effective rainwater runoff.
| Brand | |
|---|---|
| Choose Colour | |
| Choose Length |
Rated as Excellent on Trustpilot
Our customer service is rated as excellent on Trustpilot where we have over 1500 genuine customer reviews.
Customers also bought
As a family-run business, your trust really matters to us. That’s why all orders and payments are placed securely through our website, helping to keep your details safe and your order processed correctly.
We use your card issuer’s 3D Secure checks, and all payments are encrypted and handled securely by Stripe, a trusted payment provider. We never see or store your card details, so you can order with confidence knowing you’re in safe hands with Roofin Online.
We offer nationwide delivery on most products.
Delivery times are in working days (excluding weekends and bank holidays). Orders placed after 12 noon are processed from the next working day.
Some products and locations have delivery restrictions. Available options and costs are calculated automatically at checkout.
We offer free Click & Collect on most products in our online shop.
Available collection locations are displayed automatically in your basket and at checkout, based on the products you’re ordering.
We’ll contact you when your order is ready for collection. Please wait for confirmation before travelling.
Rated as Excellent
Our customer service is rated as excellent on Trustpilot where we have over 1500 genuine customer reviews.
We use cookies to improve your browsing experience and show personalised or non-personalised ads. You can accept, deny or manage your preferences at any time.