We offer our very best prices upfront to Trade & DIY alike
Payments Secured by Stripe
Fast Nationwide Delivery Available
See our 1400+ reviews on Trustpilot.
Payments Secured by Stripe
Quality Products To Your Door
See our 1400+ reviews on Trustpilot
From: £77.44 Inc VAT
Free Delivery on orders over £900 (incl VAT)
From: £77.44 Inc VAT
Free Delivery on orders over £900 (incl VAT)
Everyday Low Prices
Our huge buying power with leading manufacturers means lower prices for you
VapAir Seal MD Self Adhesive Vapour Barrier is a high-performance self-adhesive vapour control layer (VCL) manufactured from reinforced aluminium with a self-adhesive backing and removable release film.
Designed for quick and reliable installation, VapAir Seal MD provides extremely high resistance to water vapour and is particularly well suited to flat roofing systems constructed over profiled steel decking.
The membrane can be bonded to a range of compatible substrates including galvanised and uncoated surfaces, plastic-coated substrates, timber and timber-based materials, and bituminous surfaces.
VapAir Seal MD is supplied in a 1.08m width and is available in 10m, 20m, 30m and 40m roll lengths, allowing the appropriate roll size to be selected for projects ranging from smaller flat roofs to large commercial and industrial roofing installations.
For correct adhesion, VapAir Seal MD should be bonded using FG35 Primer.
VapAir Seal MD is designed to form a high-performance vapour barrier or vapour control layer within compatible flat roofing systems.
A correctly specified VCL helps control the movement of water vapour from the building interior towards the insulation and external waterproofing layers.
This is particularly important within insulated flat roof constructions, where uncontrolled moisture movement can increase the risk of condensation developing within the roof build-up.
VapAir Seal MD provides extremely high vapour resistance and can therefore form an important part of the moisture and condensation control strategy of an appropriately designed roofing system.
VapAir Seal MD consists of a reinforced aluminium membrane with a self-adhesive backing.
The aluminium construction provides the membrane with its extremely high resistance to water vapour, while the reinforcement creates a robust membrane suitable for installation across demanding roofing substrates.
The self-adhesive underside is protected by a removable release film, which is removed progressively during installation as the membrane is bonded to the prepared roof deck.
VapAir Seal MD is particularly well suited to installation over profiled steel roof decks, making it an excellent vapour control solution for commercial and industrial flat roofing systems.
Profiled metal decks are widely used beneath insulated roofing systems on:
The self-adhesive membrane can be bonded to compatible primed metal surfaces to create the required vapour control layer beneath the subsequent insulation and waterproofing system.
VapAir Seal MD is designed for quick application using its integral self-adhesive backing.
The removable release film protects the adhesive during handling and is removed as the membrane is positioned and bonded to the correctly prepared substrate.
This provides a practical installation method for both smaller roofs and larger commercial roofing projects where significant areas of vapour control membrane may need to be installed.
VapAir Seal MD should be bonded using FG35 Primer.
FG35 Primer is used to prepare the compatible substrate before installation of the self-adhesive membrane and promote reliable adhesion between VapAir Seal MD and the roof deck.
The substrate should be correctly prepared and the FG35 Primer applied in accordance with the manufacturer’s current instructions before the vapour barrier is installed.
Application rates and required drying or flash-off times should follow the current technical guidance for FG35 Primer.
VapAir Seal MD can be bonded to compatible galvanised and uncoated substrates.
This makes it particularly useful within metal deck roofing systems where a high-performance vapour barrier is required beneath the insulation.
The substrate should be appropriately prepared and FG35 Primer applied before installation.
VapAir Seal MD is suitable for compatible plastic-coated substrates.
This provides additional versatility when working with different types of coated roof decking and construction materials.
Compatibility and substrate preparation requirements should always be checked before installation.
VapAir Seal MD can also be bonded to compatible timber and timber-based roof substrates.
This allows the membrane to be incorporated into suitable flat roofing systems constructed over timber decks and timber-based boards.
The substrate should be correctly prepared and FG35 Primer used before applying the self-adhesive vapour barrier.
VapAir Seal MD can be bonded to compatible bituminous materials, providing additional flexibility for appropriate new-build and refurbishment roofing applications.
The existing substrate should be assessed for suitability, appropriately prepared and primed before installation of the membrane.
VapAir Seal MD is supplied in a consistent 1.08m width with four roll lengths available:
These figures represent the nominal membrane area of each roll before allowing for required overlaps, detailing, cutting and installation wastage.
VapAir Seal MD is used as a vapour barrier or vapour control layer within compatible insulated roofing systems.
It is designed to restrict the movement of water vapour from the building interior towards colder parts of the roof construction.
Its reinforced aluminium construction provides extremely high resistance to water vapour, making it particularly suitable for demanding flat roofing applications.
VapAir Seal MD is a high-performance vapour barrier designed for use as the vapour control layer, or VCL, within an appropriately specified roofing system.
It is incorporated into the roof build-up to control water vapour movement and help manage the risk of interstitial condensation within the construction.
Yes. VapAir Seal MD has a self-adhesive backing protected by a removable release film.
During installation, the release film is removed and the membrane is bonded to the correctly prepared and primed substrate.
This allows large areas of vapour barrier to be installed without requiring a separate adhesive layer across the membrane.
Yes. VapAir Seal MD should be bonded using FG35 Primer.
The primer prepares the compatible substrate and promotes reliable adhesion between the self-adhesive membrane and roof deck.
The manufacturer’s current installation instructions should be followed for substrate preparation, primer application and installation of the VapAir Seal MD membrane.
Yes. VapAir Seal MD is particularly well suited to profiled steel roof decking.
Its reinforced aluminium construction, high vapour resistance and self-adhesive installation make it particularly suitable for commercial and industrial insulated flat roof systems constructed over profiled metal decks.
Yes. VapAir Seal MD can be bonded to compatible galvanised substrates.
The surface should be correctly prepared and FG35 Primer applied in accordance with the manufacturer’s instructions before installing the self-adhesive membrane.
Yes. VapAir Seal MD can be bonded to compatible timber and timber-based materials.
This allows the membrane to be used as part of appropriately designed timber deck flat roofing systems as well as metal deck constructions.
FG35 Primer should be used to prepare the substrate before bonding the membrane.
Yes. VapAir Seal MD is suitable for compatible bituminous substrates.
The condition and compatibility of the existing bituminous material should be assessed before installation, with the surface appropriately prepared and primed.
A vapour control layer helps restrict the movement of moisture and water vapour from the interior of a building into the insulated roof construction.
Warm internal air can contain significant quantities of water vapour. If this vapour migrates into colder parts of the roof construction, it may reach conditions where condensation can occur.
A correctly specified and installed vapour control layer helps manage this moisture movement and forms an important part of the condensation control strategy of many insulated flat roofs.
The precise position of VapAir Seal MD depends on the design of the complete roofing system.
Within many insulated warm roof constructions, the vapour control layer is installed on the warm side of the thermal insulation, with the insulation and external waterproofing system installed above.
The actual position, substrate requirements, laps, penetrations and perimeter detailing should follow the specified roof build-up and current manufacturer’s technical guidance.
The characteristics of VapAir Seal MD make it particularly suitable for commercial and industrial flat roofing systems constructed over profiled steel decking.
Its combination of:
makes it a practical vapour control solution for larger roofing projects where significant areas need to be covered efficiently.
The availability of 40m x 1.08m rolls provides a nominal membrane area of 43.2m² per roll, helping reduce the number of individual rolls required on larger roof areas.
VapAir Seal MD provides a robust and efficient solution where a high-performance self-adhesive vapour barrier is required within an insulated flat roofing system.
The reinforced aluminium membrane provides extremely high resistance to water vapour, while the self-adhesive backing and removable release film allow for efficient installation over compatible prepared substrates.
It is particularly well suited to profiled steel roof decking, making it an excellent choice for commercial and industrial flat roofing applications, while compatibility with timber, timber-based materials and bituminous substrates provides additional versatility.
Available in 10m, 20m, 30m and 40m roll lengths, all at 1.08m wide, VapAir Seal MD can be selected according to the scale of the roofing project.
For projects requiring a self-adhesive vapour barrier, aluminium vapour control layer, flat roof VCL or vapour barrier for profiled steel decking, VapAir Seal MD provides a high-performance solution.
Please note: VapAir Seal MD should be installed using FG35 Primer on compatible and correctly prepared substrates. The complete roof construction, vapour control requirements, membrane overlaps, penetrations and perimeter detailing should follow the current manufacturer’s technical and installation guidance. Where condensation risk is a concern, the complete roof build-up should be appropriately assessed for the building’s intended internal conditions.
| Download Guide |
| Brand | |
|---|---|
| Type of Product | |
| Roll Size |
Rated as Excellent on Trustpilot
Our customer service is rated as excellent on Trustpilot where we have over 1500 genuine customer reviews.
Customers also bought
As a family-run business, your trust really matters to us. That’s why all orders and payments are placed securely through our website, helping to keep your details safe and your order processed correctly.
We use your card issuer’s 3D Secure checks, and all payments are encrypted and handled securely by Stripe, a trusted payment provider. We never see or store your card details, so you can order with confidence knowing you’re in safe hands with Roofin Online.
We offer nationwide delivery on most products.
Delivery times are in working days (excluding weekends and bank holidays). Orders placed after 12 noon are processed from the next working day.
Some products and locations have delivery restrictions. Available options and costs are calculated automatically at checkout.
We offer free Click & Collect on most products in our online shop.
Available collection locations are displayed automatically in your basket and at checkout, based on the products you’re ordering.
We’ll contact you when your order is ready for collection. Please wait for confirmation before travelling.
Rated as Excellent
Our customer service is rated as excellent on Trustpilot where we have over 1500 genuine customer reviews.
We use cookies to improve your browsing experience and show personalised or non-personalised ads. You can accept, deny or manage your preferences at any time.