Novia UV Ultraviolet Lap Tape – 75mm x 25m

Novia® Ultraviolet Lap Tape (UVLT) is a sealing and bonding tape which has a high strength acrylic dispersion adhesive, has an elastic LDPE-film carrier and is reinforced with scrim. Novia® UVLT is particularly suited for use in open facade UV breather membrane applications in walls as it has a high UV resistance. Novia® UVLT has 24 months** UV stability in open rainscreen applications with maximum joint widths up to 30mm, where ≤40% of the total area of the membrane is exposed. However, it is also suitable for overlaps and joints, on breather membranes within standard roof applications, where additional protective UV resistance is desired. Novia® UVLT is used to seal membrane overlaps which will protect against external environmental conditions and improve airtightness.

Novia® UVLT can be used with Novia Breather Membranes, such as Novia® UV Facade FR, as an edge and lap sealing tape. To fully complete a breather membrane seal and further reduce the air-leakage of the construction, this tape should be used in conjunction with Novia® Double Sided Adhesive Tape (DSLT).

Additional sealing tapes are required for use with some breather membranes in accordance with BS 5534 wind uplift requirements. Please see individual Novia Breather Membrane technical datasheets for guidance and geographical data. In these regions, the installation of a two tape system using a single sided lap tape, such as Novia® UVLT or Novia® Breather Membrane Lap Tape (BMLT) and Novia® Double Sided Lap Tape (DSLT) will provide a high specification finish. Please see individual product datasheets.

Novia UV Ultraviolet Lap Tape Features:

• Available roll sizes: 75mm x 25m

For breather membrane applications with improved airtightness Novia® UVLT should be used in conjunction with Novia® DSLT. See individual datasheets.